SmartStone Energy Solutions

Cavity wall insulation guide

CIGA guarantee: what if your installer has gone bust?

Finding damp after cavity wall insulation is worrying enough without discovering that the installer has disappeared. Start by separating the condition of the walls from the paperwork: a business closing does not, by itself, establish whether the insulation is defective or whether a particular guarantee covers the problem.

TrustMarkNational Insulation AssociationInstallation Assurance AuthorityIAAFGreen Deal ApprovedSafeContractorCheckatradeKnaufStylite CavithermInstagroupFoam MastersSWIP

Short answer

If your installer has stopped trading, contact CIGA directly to check whether your installation has a guarantee and how to report your concern. Do not arrange extraction or disturb the insulation before discussing the effect on your cover, unless urgent safety work is needed.

Start with the guarantee, not an assumption

A CIGA guarantee is not simply the installer promising to return. CIGA describes its guarantee as covering defects in materials or workmanship, subject to the terms applying to the installation. An installer going out of business is therefore a reason to contact the guarantee provider, not an automatic reason to pay for removal yourself. Equally, the existence of a certificate does not prove that every damp problem is covered.

Locate the installation date, property address and any guarantee reference. Check which organisation issued the document rather than assuming all cavity installations are registered with CIGA. Some homes have different arrangements, and some have no identifiable guarantee. If the name on your paperwork is unfamiliar, ask the named provider to explain its role and the route for reporting defects in writing.

Check whether the property has CIGA cover

Search your purchase file, completion documents, installer invoice and any energy-improvement paperwork. A previous owner may have left the certificate with the solicitor rather than in the house. Ask your conveyancer whether an installation record or guarantee was retained when you bought. Keep copies rather than sending away your only original documents.

CIGA says an original guarantee is not essential for it to investigate a concern. Its published guidance asks for ownership evidence when querying guarantee information, including a current utility bill as one of two documents. Check the current requirements directly and use the organisation’s own contact route before sharing personal information. A missing certificate is a paperwork problem to investigate, not proof that the home has no protection.

Report concerns promptly and keep the sequence clear

CIGA’s published guarantee guidance says claims must be notified within 25 years of installation. It also says installation problems should be reported to the installer as soon as practicable, with CIGA informed if matters are not satisfactorily resolved within two months. These are published headline conditions, not a substitute for reading the certificate applicable to your home.

If the installer has ceased trading, explain that when you contact CIGA rather than waiting for a reply that cannot arrive. Give the company name, approximate installation date and any evidence of closure you already have. Ask how to register the concern, what information is needed and whether any inspection must happen before repairs. Retain the date, reference number and a copy of the response. Do not assume an informal conversation has completed every notification step.

Build a useful evidence file

Photograph each affected room and the matching outside wall. Include wide views that establish the location and closer views showing staining, mould or damaged finishes. Record when the problem first appeared, whether it changes after rain and whether plumbing, heating or ventilation arrangements have changed. A dated timeline is more useful than an unsupported conclusion that the insulation must be responsible.

Collect previous surveys, invoices for roof or gutter repairs, installation records and correspondence. Mark the approximate position of defects on a simple floor plan. Avoid scraping out cavity material, drilling test holes or opening the wall yourself to obtain evidence. A professional investigation can record material type and condition without turning a straightforward concern into an avoidable dispute about later interference.

Understand what the guarantee does not establish

Damp can result from leaking gutters, cracked render, failed seals, plumbing leaks, condensation or several causes together. A guarantee investigation needs to connect a covered defect with the problem being reported. The fact that insulation was installed before a damp patch appeared is relevant history, but timing alone does not establish the route taken by moisture.

Ask for findings that distinguish observations from interpretation. For example, wet insulation at one inspection point, external pointing defects and internal staining should each be recorded separately. If a report recommends extraction, it should explain why repair alone is insufficient and which elevations require work. A clear diagnosis helps whether the eventual route is guarantee rectification, a separate building repair or further independent advice.

Understanding failed cavity insulation · Damp, mould and condensation

Do not authorise removal before checking the consequences

CIGA’s published guidance states that the guarantee is not valid if insulation has been altered or disturbed. Before commissioning extraction, opening walls or adding replacement insulation, obtain written guidance about how proposed work affects the investigation and cover. Do not rely on a salesperson’s assurance that a claim can simply be sorted out afterwards.

An urgent leak or dangerous condition may need immediate attention. Protect people first, explain the urgency to the relevant professionals and notify the guarantee provider as soon as possible. Ask contractors to photograph what they find and distinguish emergency protection from discretionary remedial work. Recording why work could not wait is sensible, but it does not guarantee that the provider will accept a later claim.

If cover is missing, disputed or outside its term

Ask for the decision and reasons in writing, including the relevant guarantee terms and the evidence relied on. If you disagree, use the provider’s current complaints procedure and ask what independent review route, if any, is available. Keep the complaint focused on the disputed findings rather than repeatedly sending the same unstructured bundle of photographs.

Where no applicable guarantee can be found, an independent diagnosis still has value. Obtain a written scope before agreeing to work and compare quotations on the same basis, including access, making good and waste handling. Separate the technical need for repairs from any possible legal claim. Time limits and recovery options depend on individual circumstances, so seek qualified legal advice if you need advice about rights against a former installer or another party.

Be cautious with claims firms and promises of free work

You do not need to appoint a claims-management business simply to raise a concern with CIGA. CIGA’s own reporting guidance makes that clear. Before signing any representation agreement, understand charges, cancellation terms, possible deductions and responsibility for costs if a case does not succeed. Never sign a description of damage that does not accurately describe your home.

Be particularly cautious if someone promises guaranteed compensation, guaranteed extraction funding or a predetermined diagnosis before inspection. A genuine guarantee claim and an eligibility-based funding scheme are different routes. Neither should be described as universally available. If you are considering financial support for work outside guarantee cover, check the current scheme rules and written eligibility decision before authorising expenditure.

Funding and grant information · Removal grants and claims explained

When to call a professional

Arrange an assessment when damp persists, wall finishes deteriorate, rooms remain unusually cold or the guarantee provider requests technical evidence. Tell the surveyor that a guarantee enquiry is active and make clear that no invasive work is authorised without agreement. A contractor’s quotation and an independent opinion serve different purposes, so ask who is responsible for the diagnosis and what the report includes.

For widespread mould, suspected structural movement or moisture near electrical fittings, seek the appropriate qualified help promptly. Do not wait for a claim decision before dealing with an immediate risk. A useful inspection should consider the building fabric, cavity condition, rain exposure and ventilation rather than treating extraction as the answer to every symptom. Ask for limitations and inaccessible areas to be stated.

Book a free survey or quote

SmartStone Energy Solutions Ltd covers Shropshire and North Wales. To discuss the condition of your walls and request a free survey or quote, call 0800 0239 272 or WhatsApp 07519 147254, Monday to Friday, 9am to 5pm. Tell us whether the installer has stopped trading and whether you have already opened a CIGA enquiry.

Have your installation date, photographs and any guarantee correspondence available. Explain that you need advice on inspection and possible remedial options before committing to extraction. A survey or quotation is not a guarantee decision, legal opinion or promise that another organisation will pay for work. The next step should protect your evidence as well as help you understand the building.

Plain-text references: CIGA, The CIGA Guarantee, https://ciga.co.uk/the-ciga-guarantee/ ; CIGA, Advice and help with reporting a concern, https://ciga.co.uk/advice-and-help-in-reporting-a-concern/

Request a free survey or quote

Request a free survey and quote or call 0800 0239 272.

Frequently asked questions

Does the guarantee disappear if the installer closes?

Do not assume so. Ask CIGA to confirm whether your property has cover and how a concern should be handled when the installer cannot respond. The applicable guarantee terms determine the position.

Can I enquire without the original certificate?

Yes. CIGA says the original guarantee is not essential to investigate a concern. It will need to establish the property and your authority to request information, so check its current evidence requirements.

Should I pay for extraction and claim it back?

Do not assume reimbursement is available. Contact the guarantee provider before disturbing insulation and ask for written instructions about investigation, authorisation and any effect on cover.

Is all damp covered by CIGA?

No such assumption is safe. The published guarantee concerns defects in materials or workmanship. Leaks, building defects and condensation require their own diagnosis, and the actual certificate terms matter.

Do I need a claims company?

Not simply to report a concern to CIGA. If you want representation or legal advice, understand the agreement and potential costs before signing.

Related

Book a survey with a local, accredited team

Based at Unit 5 Weston House, Oswestry. Covering Shropshire and North Wales for homeowners and landlords. Speak to Gary Hanson directly.

Get a free quote

No obligation. We reply Mon to Fri, 9am to 5pm.

Or call 0800 0239 272
Call WhatsAppQuote